Standard
Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)
2024-03-27
CURRENT
AMS4191K
This specification covers an aluminum alloy in the form of welding wire (see 8.5).
Search Results
Standard
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI (Alloy 263) Consumable Electrode or Vacuum Induction Melted and Remelted
2024-03-27
CURRENT
AMS5966D
This specification covers a corrosion- and heat-resistant nickel alloy in the form of welding wire.
Standard
Aluminum Alloy, Extrusions and Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), Solution and Precipitation Heat Treated
2024-03-27
CURRENT
AMS4150P
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing, flash-welded rings fabricated from extruded stock, and stock for flash-welded rings (see 8.6).
Standard
CRIMPING TOOLS, TYPE 1, TERMINAL, HAND, WIRE TERMINATION FOR WIRE BARREL SIZES 16, AND SMALLER
2024-03-22
CURRENT
AS22520/7A
Standard
ROD END - THREADED, AIRCRAFT
2024-03-22
CURRENT
AS49011C
Standard
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For
2024-03-22
CURRENT
AS4983A
This procurement specification covers tubular-shaped, coiled spring pins made of a corrosion resistant nickel base alloy of the type identified under the Unified Numbering System as UNS N07718.
Standard
Aluminum Alloy Extrusions, 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511), Solution Heat Treated, Stress Relieved, and Overaged
2024-03-22
CURRENT
AMS4157F
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 5.000 inches (127.00 mm) and under in nominal diameter or least thickness (wall thickness of tubing) (see 8.5).
Standard
JAUS Messaging over the OMG Data Distribution Service (DDS)
2024-03-18
CURRENT
ARP6227
This document defines a standard representation of JAUS AS5684A message data in DDS IDL defined by the Object Management Group (OMG) CORBA 3.2 specification. This document does NOT address how JAUS transport considerations or JAUS service protocols are implemented on OMG DDS platforms.
Standard
Engine and Transmission Identification Numbers
2024-03-18
CURRENT
J129_202403
This SAE Recommended Practice has been established to provide direction for the design and installation of an identification number (IN) as assigned to vehicle engines, transmissions, and transaxles. The IN is used for tracking or traceability of these components. In adhering to these recommended practices, facility of application in factory production and appearance quality are matters for manufacturer control. Reference SAE J853.
Standard
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
2024-03-18
CURRENT
AS24461E
Standard
Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74), Solution and Precipitation Heat Treated
2024-03-18
WIP
AMS4149G
This specification covers an aluminum alloy in the form of die and hand forgings 6.000 inches (152.00 mm) and under in nominal thickness at time of heat treatment (see 8.6).
Standard
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Extrusions, and Rings, Wear and Galling Resistant, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated
2024-03-18
CURRENT
AMS5848F
This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, extrusions, mechanical tubing, flash-welded rings, and stock for forging, extruding, or flash-welded rings.
Standard
Aluminum Alloy, Alclad Sheet 3.8Cu - 1.0Mg - 0.30Mn - 0.60Zn (Alclad 2056-T3) Solution Heat Treated and Cold Worked
2024-03-12
CURRENT
AMS4298B
This specification covers an aluminum alloy in the form of sheet 0.063 to 0.236 inch (1.60 to 6.00 mm), incl, in thickness, clad on both sides (see 8.4).
Standard
Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
2024-03-12
CURRENT
AMS5661H
This specification covers a corrosion- and heat-resistant nickel-iron alloy in the form of bars, forgings, and flash-welded rings 5.0 inches (127 mm) and under in nominal diameter, or maximum cross-sectional distance between parallel sides (thickness), and stock of any size for forging or flash-welded rings.
Standard
Aluminum Sheet, Laminated, Surface Bonded
2024-03-11
WIP
AMS4013J
This specification covers aluminum and aluminum alloy foil in the form of laminated sheet.
Standard
Aluminum Alloy, Die and Hand Forgings, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74), Solution Heat Treated and Aged
2024-03-11
WIP
AMS4131F
This specification covers an aluminum alloy in the form of die forgings and hand forgings up to 6.000 inches (152.40 mm) in nominal thickness at the time of heat treatment (see 8.4).
Standard
Aluminum Alloy, Hand Forgings and Rolled Rings, 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851), Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
2024-03-11
WIP
AMS4144H
This specification covers an aluminum alloy in the form of hand forgings 17 inches (432 mm) and under in nominal thickness, and rolled rings up to 6 inches, incl (152 mm, incl) in nominal thickness at the time of heat treatment (see 8.5).
Standard
Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged (Composition similar to UNS A97037)
2024-03-11
WIP
AMS4456B
This specification covers an aluminum alloy in the form of hand forgings 11.000 inches (280 mm) and under in nominal thickness and of forging stock of any size (see 8.6).
Standard
Aluminum Alloy, Extrusions, 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510), Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened
2024-03-08
WIP
AMS4164K
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing produced with cross sectional area of 32 in2 (206 cm2) maximum.
Standard
Aluminum Alloy, Plate, 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7651), Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
2024-03-08
WIP
AMS4204E
This specification covers an aluminum alloy in the form of plate 0.250 to 5.500 inch (6.35 to 139.70 mm), inclusive in nominal thickness (see 8.5).
